Jumper EZbook X3 6GB 64GB eMMC Laptop Windows 10 Thin and Light Laptop 13.3 inch FHD Computer PC, Intel Apollo Lake N3350 CPU,Support 256GB TF Card and SSD Expansion-Comes with British Keyboard Film

Product Information

The Jumper EZbook X3 laptop has a 13.3inch IPS, Full HD display with 1920 x 1080pixel resolution at 165ppi density. This laptop display is detailed and very clear with up to 16million display color. It offers a great viewing experience for videos and web surfing with 60Hz refresh rate. The viewing angle is wide and colors look vibrant. However, brightness levels could be better, when watching movies or playing games, the image becomes dimmer than expected. Performance and Battery life The IntelCeleron N3350is a dual-core SoC from 2016 (Apollo Lake). It supports dual-channel storage, which is of no use as the 6 GB of RAM are in single channel mode. On the right hand corner there is one USB 3.0 port and an audio port. At the left hand corner there is another USB 3.0 port, HDMI output and the power button is located on the top right corner of the keyboard. Overall the design looks good and modern. It has two speakers located under the display area which sounds pretty loud even though they don’t produce much bass. The EZbook X3 has an interface that duplicates MacBook Air’s tapered profile. Display If you look at the Ezbook from the side, it copies the MacBook Air’s tapered profile. On each side, there are three ports: two USB 3.0 ports, one microSD card, one HDMI and one audio ports, along with a proprietary power connector. As with most MacBook Air clones, the power button sits on the top right-hand side of the keyboard. Nothing special here, though. There is a 0.3 mega-pixel on the top of the screen, and the speakers are average, unlike the impeccable rear-firing MacBook Air speakers. Display Then to add Chipset we the value 14 at offset 1E3C to 13, the value 15 at offset 1E5C to 14 and the value 16 at offset 1E7C to 15.

As soon as the appropiate information pop-up comes up tap Get Started and then Next to begin the process. After having a first look at the Jumper EZbook X3 laptop, I find that it has a good design for a budget laptop. But when I examined it more, I found that the build quality was not as expected as I have seen many laptops falling in the same price band offering better build quality. The reason why I say this is because the laptop has a plastic build which feels flimsy and cheap. The hinge that holds the display also disappoints me as the display wobbles when you move the laptop. Display: Scroll down until you find the Volume with FileName Setup, it has index 14 and GUID 899407D7-99FE-43D8-9A21-79EC328CAC21, it’s a the beginning somewhere This laptop gets the Intel Celeron N3450 processor which is of course not a powerful processor. However, for performing the usual tasks of web browsing or watching videos or running office apps, it offers decent performance. While performing such tasks, it does not slow down, thanks to the large 8GB RAM offered on it. It also has a good SSD storage capacity of 256GB to let you store a good amount of data. You also get the option to expand the storage using a TF card. Battery, Connectivity and Input Devices:In the extract tab, specifiy the file to save it to e.g. ‘setup.bin’ (Browse or just type something at Module file) The battery life on the Jumper EZbook X3 laptop is pretty good with about 48hours of battery life on standby mode and 6hours of battery life over average usage time and a low level of brightness. But if you use it intensively then you may need to recharge it after 2-3hours. Features

This isn't being marketed as a gaming machine by any means either, but when services like Project xCloud on Xbox Game Pass proliferate on PC, this could actually become a decent gaming option for in between those intense study sessions. The Intel Graphics HD 600 combined with 8GB of RAM and the quad-core Celeron processor can actually make short work of many older, less-intensive gaming titles on Steam as well. Just don't expect to be running Cyberpunk 2077 or any modern game on this thing. Even Minecraft and World of Warcraft don't run particularly well.If UEFI: Build-in Efi Shell is not available select Enter-Setup go to the Save & Exit tab and at the bottom there should be the UEFI: Build-in Efi Shell Equipped with a 13.3 inch FHD display, powered by Intel Apollo Lake N3450 processor, Designed with HDMI output, allows you to connect it to monitors, TV or projectors, perfect for creating your personal home theater. Dual band 2.4GHz / 5.0GHz WiFi supported, ensures you high-speed surfing. You can’t do a lot with this processor. On the contrary, the SoC lazes around at the bottom of our R15 loop comparison table, together with the AMDA6-9220e. Performance is constant. You can see clearly why thePentium N5000(Medion) and theCeleron N4100(Chuwi LapBook Pro) are the better choice.

We do not take any responsibilities for your actions or damages caused by following the tutorial or use its material! inputfile is the extracted Setup from 2.2.1 and output file is a text file of your choice e.g. ‘setup.txt’ However, if you try to move up to things like Adobe Photoshop, or even higher, like Premiere Pro, you may find that you've hit the limits of what this laptop can do.The anti-glare 13.3-inch panel has a resolution of 1920×1080 pixels and offers a decent contrast ratio of 1045:1 and a good color display. The screen does not use PWM to regulate the brightness. I only tried the first one, so i am only gonna write about it, but the others should behave similar. The modding of this module that we extracted at 2.2.3 is a bit less obvious that the Setup because in this case we can’t use the ifrextract tool.